Flooring contractor in Canyon, TX - garage, shop and basement floors that hold
Keystone Amarillo Epoxy Flooring is a flooring contractor based in Amarillo that coats, polishes, repairs and strips concrete floors in Canyon, TX, from home garages and basements to pool decks and shop floors.
Canyon floors, from the square to the newer streets
Canyon is a short drive south of Amarillo, where we're based, and we work here and in the cities around both. It has its own character, centered on the downtown square with the restored county courthouse in the middle and boutiques, art and places to eat around it, and those buildings bring us storefront and shop floors. Out from the square are established neighborhoods and newer subdivisions, and that's where the garage, basement and patio calls come from.
That spread of ages decides how much prep a floor takes. An older slab often hides layers of coating, glue or stain we have to take off first, while a newer garage slab usually needs less before it's ready.
Services in Canyon, TX
Garage Floor Coatings
Garages here take oil drips and hot-tire marks from trucks parked on bare concrete. We pull the oil out and grind the surface before any coating goes down.
Commercial & Industrial Epoxy Floor Coatings
Shop floors and work bays in Canyon take carts, equipment and spills every day. Our commercial epoxy floor coatings are built for that kind of wear.
Concrete Floor Stripping & Removal
Plenty of slabs here carry an old coating or a DIY kit that's peeling. We strip it to bare concrete so the next floor has something to grip.
Basement Flooring
Basements and below-grade rooms can hold moisture that pushes coatings off from underneath. I test the slab first and pick a floor that suits what it shows.
Polished Concrete Flooring
Older storefronts and homes around downtown sometimes have good concrete hiding under carpet or tile. Polishing it gives you a hard floor with no coating to wear off.
Pool Deck Coatings & Resurfacing
Pool decks around Canyon get bare feet, splashing and pool chemicals on concrete that's often cracked. We repair the cracks first, then resurface or coat the deck.
What to know about permits and contractors in Canyon
Permits in Canyon come from the city's building official, who takes applications through Permit & Inspections at 806-655-5034, and whether a floor job needs one is the city's call, not mine. If there's any doubt, I check with them before we start, because a permit has to be in hand before work begins and that wait goes on the schedule. When you're vetting a contractor here, ask whether they're registered with the city for permitted work inside city limits, and keep in mind that Texas licenses plumbers, electricians and air conditioning contractors, so a floor project that moves a drain or a wire needs one of those trades for that part. We're fully licensed and insured.
We come down from Amarillo for Canyon jobs, and the price and the schedule here turn mostly on what the slab needs before anything goes on it. An old coating or glue to strip, oil soaked into a garage floor, cracks to fill and moisture coming up through the concrete all add prep time, and the size of the floor and the finish you choose do the rest. I can't tell you which of those your floor has until I've seen it, so your number comes as a written price after the estimate.
What Canyon slabs usually need from us
The city says much of Canyon lies within a special flood hazard area, and a slab on low ground, or one that's taken water before, can hold moisture long after it looks dry. Moisture pushing up through concrete is one of the main reasons a coating lets go, so I test the slab at the estimate and pick a floor that can handle what I find, or tell you plainly when a coating isn't the right call.
The other thing we see a lot is earlier work that didn't last, like a store-bought garage kit peeling under tires or a patio sealer gone cloudy and flaky. Those floors have to go back to bare concrete before anything new goes down, and that's prep I won't skip.
Get a free on-site estimate for your Canyon floor
Send the form and I'll get back to you within one business day to set a time to see your floor in Canyon. The estimate is free and done on site, and there's no pressure to book.
How it goes when you call us about a Canyon floor
Call or send the form
Calls come to me, and I ask a few questions about the floor and how you use it. Tell me what's on it now, like an old coating, carpet glue or oil stains.
I come out and look
I come out to your Canyon property myself, look the slab over and test it for moisture. Clear the walls and corners if you can, so I can see the edges and any cracks.
Talk options, get a price
We go over the floors that suit your slab and how you use it, and I'll say so if a simpler one fits better. Then you get a written price.
Check on any permit
If it isn't clear whether your job needs a permit, we ask the city's building office and tell you what we learn. When one is needed, its review has to finish before we start.
Prep, finish and walk through
Our crew does the prep before any coating goes down, and I'm on the floor with them while the work gets done. When we're finished, I walk the floor with you.
Questions about flooring work in Canyon
Which home projects need a building permit in Canyon, TX?
Canyon requires a building permit for work that builds, enlarges, alters, repairs, moves or demolishes a building or changes how it's used, and its list of exempt work includes painting, tiling, carpeting and similar finish work. Plumbing work, like moving a floor drain, needs its own permit. Where a coating on your existing slab falls is up to the city, so if you're unsure, ask us and we'll check with them before we start.
Does my flooring contractor need to register with the City of Canyon?
Yes, if the work needs a permit and the contractor is in one of the city's listed categories, they register with the city before working inside city limits. Registration means presenting a bond, an insurance certificate or both and paying fees. For a residential addition or remodeling contractor, who works on one- and two-family homes and townhouses up to three stories, that's a $90 yearly fee, a $15 technology fee and a $20,000 surety bond for additions and remodels.
How do I find out if my lot in Canyon is in a flood hazard area?
Ask the city's Planning & Development Department for a floodplain determination at 806-655-5014, since that's where the city takes those requests. Structures built in special flood hazard areas have to meet specific requirements under the city's flood rules, so it's worth asking before a project that builds or adds on.
What building codes does Canyon, TX use?
Canyon uses the International Building, Residential, Existing Building, Mechanical, Plumbing, Fuel Gas and Fire Codes, along with the International Energy Conservation Code and the National Electrical Code. The city also lists a Panhandle Residential Foundation Manual and posts its building codes and local amendments online, and that manual matters most when a new slab is poured.
How much does it cost to coat a garage floor in Canyon?
The cost comes down mostly to how much prep your slab needs and which finish you pick, and you get a written price after I've looked at it. Stripping an old coating, dealing with moisture or filling a lot of cracks adds to it, and a metallic or decorative finish costs more than a basic single-color coating or a sealer. If the budget is tight, a simpler floor on a well-prepped slab usually serves you better than a fancy one on a rushed slab.
What causes epoxy to peel off a garage floor in Canyon?
Peeling usually comes from poor prep or from moisture under the coating. Epoxy needs clean, ground concrete to grab onto, so a coat rolled over a smooth, dusty or oily slab lets go, and hot tires pull it up fastest. That's why we grind and run the moisture check before anything goes down, and if yours is already peeling, we strip it back to bare concrete first.
Nearby areas
Tell me about your floor in Canyon
We take calls from 6 AM to 11 PM, seven days a week, so call (806) 457-5783 or send the form whenever you're standing in that garage wondering what to do with it.